Toshiba BDX2250KU User Manual
12
Connecting a USB Flash Drive
A USB fl ash drive provides an additional memory to
software upgrade and enjoy BD-Live™ bonus content.
software upgrade and enjoy BD-Live™ bonus content.
You can also enjoy playing back MP3/WMA/JPEG fi les
stored in the USB fl ash drive.
stored in the USB fl ash drive.
Inserting a USB fl ash drive into the USB port on the back
of Blu-ray Disc™ player until it clicks.
of Blu-ray Disc™ player until it clicks.
Connections
USB Flash Drive
USB
Notes:
Connect only a USB fl ash drive to the USB port on this product.
•
If you cannot easily insert the USB fl ash drive, you may have
•
inserted it incorrectly. Try to turnover the device and then insert
again.
Do not remove the USB fl ash drive during playback.
again.
Do not remove the USB fl ash drive during playback.
•
BD-Live™: Access to BD-Live™ requires use of USB fl ash drive
•
(not included) installed in the USB port. For additional information
regarding the access to BD-Live™, see page 21 of the manual.
TOSHIBA does not guarantee 100% compatibility with all USB
regarding the access to BD-Live™, see page 21 of the manual.
TOSHIBA does not guarantee 100% compatibility with all USB
•
fl ash drives.
Connecting your player to a wireless access point or router
Your Blu-ray Disc™ player has an integrated Wi-Fi device and antenna. No physical connection to the wireless router
is necessary.
is necessary.
Confi gure your player to access the wireless access point or router. For more information, see “Confi guring a wireless
•
Internet connection” on page 26.
The network confi guration and connection method may vary depending on the equipment in use and the network
•
environment. Your Blu-ray Disc™ player is equipped with an IEEE 802.11n wireless module, which also supports the
802.11 a/b/g/n standards. For the best wireless performance, we recommend using an IEEE 802.11n certifi ed Wi-Fi
network (access point or wireless router).
802.11 a/b/g/n standards. For the best wireless performance, we recommend using an IEEE 802.11n certifi ed Wi-Fi
network (access point or wireless router).
Notes:
You must use a wireless IP sharer that supports
•
IEEE 802.11 a/b/g/n. (n is recommended for
stable operation of the wireless network.)
stable operation of the wireless network.)
Wireless LAN, in its nature, may cause
•
interference, depending on the use condition
(AP performance, distance, obstacle, interference
by other radio devices, etc.).
(AP performance, distance, obstacle, interference
by other radio devices, etc.).
Set the wireless IP sharer to Infrastructure mode.
•
Ad-hoc mode is not supported.
When applying the security key for the AP
•
(wireless IP sharer), only the following is
supported.
supported.
1) Authentication Mode : WPAPSK, WPA2PSK
2) Encryption Type : WEP, TKIP, AES
Wireless access point
Modem Cable
Modem Port