Honeywell 16 Plus User Manual

5

Note: If the system is programmed for Alarm Abort a period of 90 seconds after expiry of the

Entry Time is provided to enable the user to cancel an alarm caused by exceeding the
Entry Time or deviating from the entry route.
If the 90 second Alarm Abort time is exceeded then a full alarm may result in the Police

being called to the premises and the system requiring an Engineer Reset.

The installation engineer will explain the operation of the Alarm Abort function where necessary.

To cancel an alarm enter your user code. The keypad displays the zones that have been
activated during the alarm. Press the esc key to return to the normal display.

Certain types of alarms, once cancelled, require a code authorised with the appropriate reset
authorisation to be entered. The system prompts for a valid reset code by displaying
INTRUDER RESET REQUIRED, PA RESET REQUIRED or ENGINEER RESET REQUIRED on
the keypad.

Certain types of alarm require an engineer to visit the site and, after investigation, reset the
system.