Honeywell 16 Plus User Manual
vii
QUICK OPERATION GUIDE
A
SET (an Unset system)
B
PART SET (Defaults to Parts 1 and 2)
1 key • toggles the Set (ON)/Unset (OFF) status of Part 1
2 key • toggles the Set (ON)/Unset (OFF) status of Part 2
3 key • toggles the Set (ON)/Unset (OFF) status of Part 3
1 key • toggles the Set (ON)/Unset (OFF) status of Part 1
2 key • toggles the Set (ON)/Unset (OFF) status of Part 2
3 key • toggles the Set (ON)/Unset (OFF) status of Part 3
e n t
UNSET (a Set system)
1
OMIT ZONES
A or B key to view zones
# to change omit status of zone (must be an omittable zone)
ent key to accept programming and start setting
esc key to accept programming without setting
A or B key to view zones
# to change omit status of zone (must be an omittable zone)
ent key to accept programming and start setting
esc key to accept programming without setting
2
CHIME ZONES
A or B key to view zones
# key to enable/disable chime function on zone
ent key to accept
esc key to cancel
A or B key to view zones
# key to enable/disable chime function on zone
ent key to accept
esc key to cancel
3
WALK TEST
A or B key to view zones
# key to enable/disable Walk Test function on zone
ent key to start Walk Test
# key to toggle display between open and tested zones
esc key to end Walk Test
Note: Zones number 10 to 16 will be displayed as A to G
A or B key to view zones
# key to enable/disable Walk Test function on zone
ent key to start Walk Test
# key to toggle display between open and tested zones
esc key to end Walk Test
Note: Zones number 10 to 16 will be displayed as A to G
4
(ASSIGNING) USER CODES
A or B key to select user (1 – 14)
ent key to program code
number keys to enter digits, ¸ key to delete digits
ent key to accept programming, esc to cancel
A or B key to select user (1 – 14)
ent key to program code
number keys to enter digits, ¸ key to delete digits
ent key to accept programming, esc to cancel
5
TEST OUTPUTS
A or B key to select output for test
# key to enable/disable test function on zone
esc key to end test
A or B key to select output for test
# key to enable/disable test function on zone
esc key to end test
9
LOG
A key to step forwards through events
B key to step backwards through events
# key to display event date
esc key to exit Log
A key to step forwards through events
B key to step backwards through events
# key to display event date
esc key to exit Log
ent+B TIME
To access the Time option, enter your user code, press the ent key,
the B key and then the ent key.
Then press the:
the B key and then the ent key.
Then press the:
•
1 key to select Time (hh/mm)
•
2 key to select Date (dd/mm/yy)
•
3 key to select Start Summer (dd/mm)
•
4 key to select End Summer (dd/mm).
Press the ent key to accept the programming for each option,
or the esc key to cancel.
or the esc key to cancel.
Enter your user
code then select
code then select