Crimestopper Security Products SP-300 User Manual

Page of 16
 
12 
OPTION PROGRAMMING 
 
 
6. ACTIVE RE-ARMING 
Active  Re-arming  allows  the  system  to  re-arm  itself  30  seconds  after  disarmed  with  the  transmitter  if  a  door 
has not been opened.  This is handy if the vehicle is accidentally disarmed (via the Transmitter in your pocket) 
without  you  knowing  it.  Note:  Active  re-arm  is  reset  by  dome  light  illumination.    If  you  are  using  dome  light 
illumination, active re-arm will not function. 
 
 
7. DOUBLE UNLOCK PULSE 
With this feature enabled, the unit will send 2 unlock pulses when the #2 Unlock button is pressed.  2 pulses 
are  required  for  interfacing  into  some  existing  Factory  Keyless  Entry  or  Alarm  systems  on  vehicles  such  as 
Nissan, VW, Toyota, and Lexus vehicles. 
 
8. SILENT ARMING /DISARMING (CHIRP DEFEAT) 
With this feature, the system can be Arm and Disarm without the siren chirp using button #1 & #2.  Flashing 
parking lights will be the only Arm/Disarm confirmation. 
 
9. PARKING LIGHTS ON WITH DISARM 
Keeps  parking  lights  on  instead  of  2  flashes  when  system  is  disarmed  to  assist  in  locating  your  vehicle  in  a 
crowded parking lot or structure.  Light will stay on for 30 Sec. or until Ignition is turned on. 
 
10. DISARM WITH AUX. OUTPUT 1 (TRUNK POP) 
Controls whether the system will or will not DISARM when the trunk pop or AUX. feature is used.  When the 
feature  is  turned  on  the  unit  will  DISARM  when  opening  trunk  or  using  an  auxiliary  device  controlled  by  the 
Gray output wire. 
 
11. N/A, NO OPTION 
 
12. DOOR LOCK/UNLOCK PULSE TIME 
Controls the amount of time (0.75 sec. or 3 sec.) for the lock/unlock pulse.  The 3 sec. setting may be required 
for 1980’/90’s European Vehicles that require a long pulse to do Vacuum door lock systems. 
 
13. ACTIVE, PASSIVE, or FULL-TIME CARJACK PROTECTION 
This feature controls the type of Carjack protection the alarm will provide.  There are 3 selections: Button 1 
(Lock) = Active protection.  Button 2 (Unlock) = Passive protection.  Button 3 (Trunk) = Full-Time protection.  
Option number 14 must be enabled to allow Carjack functions to operate.  See Carjack Protection features.