Heath Zenith SH-5512 User Manual

Page of 20
© 2008 HeathCo LLC 
598-1160-03
D
ual
B
rite
®
 Twin Halogen
Motion Sensing Light
Features
•  D
ual
Z
one
™ Technology.
•  Turns on lighting when motion is detected.
•  Automatically turns lighting off. 
•  Bulb Saver™ - Extends bulb life by up to 4x standard 
bulbs. Lights bulb to full bright in under 2 seconds.
•  D
ual
B
rite
®
 Timer. 
•  Photocell keeps the lighting off during daylight hours.
•  LED indicates motion was sensed (day or night).
Package Contents
Requirements
•  The light control requires 120-volts AC.
•  If you want to use Manual Mode, the control must be 
wired through a switch.
• 
Some codes require installation by a qualified 
electrician. 
•  This product is intended for use with the enclosed 
gasket and with a junction box marked for use in wet 
locations.
Cover 
Plate
Light Control
Sensor
3 Wire 
Connectors
Gasket
6 Mounting 
Screws (3 sizes)
Mounting Bolt
Mounting Strap
Rubber Plug
OPERATION
* resets to Auto Mode at dawn.
TEST
Put  ON-TIME  switch 
on the sensor bottom 
to TEST and the D
ual
-
B
rite
®
 switch OFF.
MANUAL MODE
ON-TIME
TEST 
1 5 20
... back on.
AUTO
1 Second OFF 
then...
Note: When first turned on wait about 1 
1
/
2
 minutes for 
the circuitry to calibrate.
Manual  mode  only  works  at  night 
because daylight returns the sensor 
to AUTO.
Flip the light switch off for one second 
then back on to toggle between AUTO 
and MANUAL MODE.
Manual  mode  works  only  with  the 
ON-TIME  switch  in  the  1,  5,  or  20 
position.
Light Shield
Plastic Hanger
2 Halogen Bulbs
Put the ON-TIME switch in the 1, 5, 
or 20 minute position.
Mode:
On-Time
Works:
Day Night
Test
5 Seconds
x
x
Auto
1, 5, or 20 Min
x
Manual
To Dawn*
x
Accent
3, 6 Hr, to Dawn
x
TEST 1 5 20
ON-TIME D
ual
B
rite
®
Off  3  6  Dusk to
 
    Dawn
Meets the ENERGY STAR
®
 guidelines 
when  D
ual
B
rite
®
  function  is  off  and 
ON-TIME is 1 or 5 minutes and when 
used with 120 W Max bulbs.
Model SH-5512