Heath Zenith SL-4290 Series User Manual

ual

rite

Motion

Sensing Diecast
Lantern

598-1277-02

OPERATION

* resets to Auto Mode at dawn.

Set the ON-TIME switch
on the bottom of the cover
plate to

TEST.

TEST 1 5 10 MIN

Set ON-TIME switch to
1, 5, or 10 minutes.

1 Second

OFF then...

Manual mode only works at
night  because  daylight  re-
turns the sensor to AUTO.
Flip  the  light  switch  off  for
one second then back on to
toggle  between  AUTO  and
MANUAL MODE.
Manual mode works only with
the ON-TIME switch in the 1,
5, or 10 position.

... back on.

Note: When first turned on wait about 1

minutes for the circuitry to calibrate.

TEST

AUTO

MANUAL MODE

TEST

1 5 10 MIN

Mode:

On-Time

Works: Day Night

Test

5 Seconds

Auto

1, 5, or 10 Min

Manual

To Dawn*

Accent

3,6 Hr. to Dawn

Before installation, record the model
number from back of fixture below.
Attach receipt in case of possible war-
ranty issues.

Questions or problems? Before returning
to your retailer, refer to the troubleshooting
guide in this manual or call our technical ser-
vice department at 1-800-858-8501 (English
speaking only), 7:30 am to 4:30 pm, CST,
Monday – Friday.

Features

• Light comes on when motion is detected.
• Automatically turns light off.
• Dusk Accent lighting.
• Photocell keeps the light off during daylight

hours.

Package Contents

• Lantern
• Universal Mounting Bracket
• Mounting Screws (Includes extra long screw

studs for recessed junction box mounting)

• Wire Connectors

Requirements

• The light control requires 120 volts AC.
• If you want to use Manual Mode, the control

must be wired through a switch.

•

Some electrical codes require installa-
tion by a qualified electrician.

ON-TIME

SL-4290 Series

Meets the ENERGY STAR

guidelines when D

ual

rite

function is off.