Heath Zenith SL-4190 Series User Manual

Page of 24
Motion Sensing
Diecast Lantern
SL-4190 Series
Features
•  Light comes on when motion is detected.
•  Automatically turns light off.
•  Dusk Accent lighting.
•  Photocell keeps the light off during daylight 
hours.
Requirements
•  The light control requires 120 volts AC.
•  If you want to use Manual Mode, the control 
must be wired through a switch.
• 
Some  codes  require  installation  by  a 
qualified electrician.
© 2007 HeathCo LLC 
595-5628-08
OPERATION
* resets to Auto Mode at dawn.
Set the ON-TIME switch 
on  the  bottom  of  the 
cover plate to 
TEST.
TEST  1  5 10  MIN
Set ON-TIME switch to 
1, 5, or 10 minutes.
1 Second 
OFF then...
Manual mode only works at 
night because daylight re-
turns the sensor to AUTO.
Flip the light switch off for 
one second then back on to 
toggle between AUTO and 
MANUAL MODE.
Manual  mode  works  only 
with the ON-TIME switch in 
the 1, 5, or 10 position.
... back on.
This package includes:
•  Lantern
•  Easy  to  use  universal  mounting  bracket 
(X-Bar)
•  Mounting hardware
•  Wire nuts
Note: When first turned on wait about 1 
1
/
2
 
minutes for the circuitry to calibrate.
TEST
AUTO
MANUAL MODE
TEST 
1  5 10  MIN
Mode:
On-Time
Works: Day Night
Test
5 Seconds
x
x
Auto
1, 5, or 10 Min
x
Manual
To Dawn*
x
Accent
3, 6 Hr, to Dawn
x
Meets  the  ENERGY  STAR
®
 
guidelines  when  D
ual
B
rite
®
 
function is off.