Manualsbrain.com
  1. Manuals
  2. Brands
  3. Heath Zenith
  4. SL-5514
  5. User Manual

Heath Zenith SL-5514 User Manual

Download
Page of 12
© 2007 HeathCo LLC 
595-5730-05
Twin Halogen Motion 
Sensing Light Control
Model SL-5514
Features
•  Turns on lighting when motion is detected.
•  Automatically turns lighting off. 
•  Photocell  keeps  the  lighting  off  during  daylight 
hours.
Requirements
• 
The light control requires 120-volts AC.
• 
If you want to use Manual Mode, the control must 
be wired through a switch.
• 
Some codes require installation by a qualified 
electrician.
• 
This product is intended for use with the enclosed 
gasket and with a junction box marked for use in 
wet locations.
Cover Plate
Light Control
Sensor
3 Wire 
Connectors
Gasket
6 Mounting 
Screws (3 sizes)
Mounting Bolt
Mounting Strap
Rubber Plug
Plastic Hanger
2 Halogen Bulbs
This package includes:
OPERATION
* resets to Auto Mode at dawn.
Note:  When first turned on wait about 1 
1
/
2
 minutes for 
the circuitry to calibrate.
MANUAL MODE
ON-TIME
10 5 1 TEST
10 5 1 
TEST
ON-TIME
TEST
... back on.
AUTO
1 Second 
OFF then...
Put the ON-TIME switch in the 1, 5, 
or 10 minute position.
Put the ON-TIME switch on the bottom 
of the sensor in the TEST position.
Manual  mode  only  works  at  night 
because daylight returns the sensor 
to AUTO.
Flip the light switch off for one second 
then back on to toggle between AUTO 
and MANUAL MODE.
Manual  mode  works  only  with  the 
ON-TIME  switch  in  the  1,  5,  or  10 
position.
Move ON-TIME Switch to 
1, 5, or 10 minutes
Mode Switching Summary
Flip light switch off 
for one second then 
back on*
MANUAL MODE
AUTO
TEST
*  If you get confused while switching modes, turn the 
power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.
Mode:
On-Time
Works:
Day Night
Test
5 Seconds
x
x
Auto
1, 5, or 10 Min
x
Manual
Until Dawn*
x