APC NBPD0155 User Manual
NetBotz Room Sensor Pod 155 Installation Manual
5
Rear
Item
Description
Sensor ports
Used for connecting APC sensors, third-party dry contact sensors, and
standard third-party 0-5 V sensors. (See “Additional options” on
page 3 for details on APC sensor options.)
standard third-party 0-5 V sensors. (See “Additional options” on
page 3 for details on APC sensor options.)
Third-party dry contact sensors require the NetBotz Dry Contact Cable
(NBES0304). Standard third-party 0-5 V sensors require the
NetBotz 0-5 V Sensor Cable (NBES0305).
(NBES0304). Standard third-party 0-5 V sensors require the
NetBotz 0-5 V Sensor Cable (NBES0305).
A-Link ports
• Left port in
• Right port out
• Left port in
• Right port out
Used for connecting the NetBotz 155 to a NetBotz Rack Monitor 450,
NetBotz Room Monitor 455, or NetBotz Rack Monitor 550. Standard
CAT-5 cabling with straight-through wiring is required. Depending on
the appliance to which the NetBotz 155 is connected, multiple devices
may be cascaded along an A-Link bus.
NetBotz Room Monitor 455, or NetBotz Rack Monitor 550. Standard
CAT-5 cabling with straight-through wiring is required. Depending on
the appliance to which the NetBotz 155 is connected, multiple devices
may be cascaded along an A-Link bus.
24 VDC input
Provides supplemental power for high-current load configurations.
Supplemental power is not required for most system configurations.
See the installation and quick configuration manual included with your
appliance to determine whether supplemental power is required.
Supplemental power is not required for most system configurations.
See the installation and quick configuration manual included with your
appliance to determine whether supplemental power is required.