Sierra Housewares S5011 User Manual
4
29
Disarm/Alarms
Entry Delays
Similar to an exit delay, an entry delay is the time you are allowed
to enter the building, walk to the keypad, and enter a user code
before an alarm sounds. This delay lasts from 10 to 255 sec-
onds, depending on your system's programming. The length of
the delay may differ, depending on which door you use.
to enter the building, walk to the keypad, and enter a user code
before an alarm sounds. This delay lasts from 10 to 255 sec-
onds, depending on your system's programming. The length of
the delay may differ, depending on which door you use.
During the entry delay, the Arm LED blinks. The keypad may
beep during the delay. If so, it beeps faster during the last ten
seconds. As shown to the right, a bar appears at the base of the
display. This bar represents the
amount of time you have to enter
the building and disarm the sys-
tem.
beep during the delay. If so, it beeps faster during the last ten
seconds. As shown to the right, a bar appears at the base of the
display. This bar represents the
amount of time you have to enter
the building and disarm the sys-
tem.
When half of the time has expired,
the bar is half its original length.
the bar is half its original length.
Disarming
To Disarm the System:
1.
Enter through a door pro-
grammed with an entry delay.
2.
Enter your user code.
Regardless of which method
was used to arm your system,
the disarming sequence is al-
ways the same.
was used to arm your system,
the disarming sequence is al-
ways the same.
Be sure that the door you use
to enter the building has been
programmed with an entry de-
lay.
to enter the building has been
programmed with an entry de-
lay.