Heath Zenith 5598 User Manual
Features
• Automatically comes on when motion is detected.
• Automatically turns light off.
• Photocell keeps the light off during daylight
• Automatically turns light off.
• Photocell keeps the light off during daylight
hours.
© 2007 DESA Specialty Products™
598-1314-00
unpacking
Be sure to remove all contents from packaging and
verify all items are present before assembling this light
fixture. This package includes the following items:
• Lantern (Includes: Top Cover, Glass Fixture, Fixture
verify all items are present before assembling this light
fixture. This package includes the following items:
• Lantern (Includes: Top Cover, Glass Fixture, Fixture
Base)
• Universal mounting bracket (X-Bar)
• Mounting hardware
• Wire nuts
• Owner’s Manual
• Mounting hardware
• Wire nuts
• Owner’s Manual
Before installation, record the model number
listed inside the fixture. attach receipt in case
of possible warranty issues.
listed inside the fixture. attach receipt in case
of possible warranty issues.
Model number:
requireMents
• The Light Control requires 120 volts AC.
• If you want to use Manual Mode, the control must
• If you want to use Manual Mode, the control must
be wired through a switch.
•
some electrical codes require installation by a
qualified electrician.
qualified electrician.
Motion sensing
Diecast Metal Lantern
Lantern asseMBLy
1. Place glass fixture onto base assembly.
2. Line up the arrow on the bottom of glass fixture
2. Line up the arrow on the bottom of glass fixture
with the arrow on the fixture base (see illustration
below).
below).
Glass Fixture
Arrows
Fixture
Base
Base
Glass Fixture
Fixture Base
3. Gently push the two pieces together and rotate
the glass fixture 90° as shown below.