Heath Zenith 52-4042-2 User Manual

598-1198-01

Models 52-4042-2 / 52-4041-4

Features

• Turns on lighting when motion is detected.
• On-Time control allows length of time light stays on

to be adjusted.

• Photocell keeps light off during daylight hours.
• LED flashes day or night to indicate motion has been

detected.

Security Light with
Motion-Activated
Sensor

OPERATION

* resets to Auto Mode at dawn.

MANUAL MODE

ON-TIME

10 5 1 TEST

10 5 1

TEST

ON-TIME

TEST

... back on.

AUTO

1 Second OFF

then...

Put the ON-TIME switch in the
1, 5, or 10 minute position.

Put the ON-TIME switch on the bottom
of the sensor in the TEST position.

Manual mode only works at night
because daylight returns the sensor
to AUTO.

Flip the light switch off for one second
then back on to toggle between AUTO
and MANUAL MODE.

Manual mode works only with the
ON-TIME switch in the 1, 5, or 10
position.

Move ON-TIME Switch to

1, 5, or 10 minutes

Mode Switching Summary

Flip light switch off

for one second then

back on*

MANUAL MODE

AUTO

TEST

Requirements

• The light control requires 120-volts AC.
• If you want to use Manual Mode, the control must be

wired through a switch.

•

Some codes require installation by a
qualified electrician.

• This product is intended for use with the enclosed

gasket and with a junction box marked for use in wet
locations.

Light Control

Sensor

Cover

Plate

Lamp

Holders

* If you get confused while switching modes, turn the

power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.

Note: When first turned on wait about 1

minutes for

the circuitry to calibrate.

Plastic Hanger

Rubber Plug

Gasket

Mounting Strap

Mounting Bolt

2 Wire

Connectors

This package includes:

6 Screws

(3 sizes included)

Mode:

On-Time

Works: Day Night

Test

5 Seconds

Auto

1, 5, or 10 Minutes

Manual

To Dawn*