Gianni Industries EM-400x Leaflet

Auxiliary reader

The auxiliary reader must not be further than 50 meters from

the DG-600E. Also this reader should be nearer than 60
centimeters, to avoid disturbance. The suggested wire gauge
is #22~26 AWG.

auxiliary

Split of units for DG-600E and

reader

in ranging up to 50 M bring out the friendly system

device for low cost but high security with anti-tampering as
well as convenience and reliability.

GIANNI INDUSTRIES, INC.

The products are manufactured under an ISO
9 0 0 1

Q C

0 8 0 0 0 0

C e r t i f i e d

Q u a l i t y

Management Program environment back its
product quality, performance and commitment
to customer satisfaction.

DG-600E
Stand-alone Proximity Reader

GEMPROX-E

125 KHz, Wiegand 26-bit
hexadecimal format output
Size:88(L) X 44(W)X16(D)mm

Connecting Diagram

Fail-Safe Lock
St 2 connect to 1-2

Contact door switch or the

electric lock signal output

Push Button

External relay start

the warning system

Auxiliary Reader

(Wiegand Format)

Connect to 1-2;C and D contact is N.C.
Connect to 2-3; for N.O.

Connect to 1-2;C and A contact is N.C.
Connect to 2-3; for N.O.

Fail-Secure Lock
St 2 connect to 2-3

*Linear supply recommended

Power supply

(9~16Vdc)

Insert 2-3 position to reset

DG-600E Jp1 leads to Wiegand 44 bits format

DG-600E Jp1 short-circuit to Wiegand 26 bits format

No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw