Gianni Industries EM-750 Leaflet
Statement
Specifications
GIANNI INDUSTRIES, INC.
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-EM-750 Ver. C Published on 2008.05.12
DM-CA-EM-750 Ver. C Published on 2008.05.12
The products are manufactured under an ISO
9 0 0 1
9 0 0 1
Q C
0 8 0 0 0 0
C e r t i f i e d
Q u a l i t y
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
product quality, performance and commitment
to customer satisfaction.
&
Regular Installation
Waterproof Test:
Reference to IEC 60529 Edition 2.1: 2001-02-IPX7
Reference to IEC 60529 Edition 2.1: 2001-02-IPX7
This series of Waterproof Magnetic Lock is made with epoxy
potting compound and is protected by this compound. Also,
GEM Waterproof Series Magnetic Locks have been proved to
have withstood a water resistance as established in
accordance with the test procedures of IPX7, IPX8 through a
trusted third party. Therefore users need not worry that the
lock will be rusted or sparked, if the lock is using in outdoor
applications and installing in confined space where any
inflammable gas.
potting compound and is protected by this compound. Also,
GEM Waterproof Series Magnetic Locks have been proved to
have withstood a water resistance as established in
accordance with the test procedures of IPX7, IPX8 through a
trusted third party. Therefore users need not worry that the
lock will be rusted or sparked, if the lock is using in outdoor
applications and installing in confined space where any
inflammable gas.
EM-750 Midi Surface
Water-Proof Electromagnetic Lock
Water-Proof Electromagnetic Lock
Magnet
Armature
(Power Off)
Magnet
Armature
(On Power)
Unique Anti-Residual design
When there is no power, there will be no holding force, and the push-off
button will pop out immediately, to release the Electromagnetic Lock
and the Armature Plate for no residual magnetism.
button will pop out immediately, to release the Electromagnetic Lock
and the Armature Plate for no residual magnetism.
The EM-750 Electromagnetic Lock design with no
mechanical parts but magnetic force to secure and release the
doors, suitable for use in areas which required access
controlled or egress such as exit door.
doors, suitable for use in areas which required access
controlled or egress such as exit door.
The Electromagnetic Locks are totally sealed in an epoxy
filled stainless steel case for water-resistant and vandal-
resistant purpose. A threaded conduit fitting ensures weather
resistant protection of the wiring therefore it is ideal for indoor
and outdoor applications, even in severe weather.
resistant purpose. A threaded conduit fitting ensures weather
resistant protection of the wiring therefore it is ideal for indoor
and outdoor applications, even in severe weather.
We offers up to 800 pounds holding force with 12V DC
power input (24V DC or 12/24V DC dual input voltage
available by special order), and with the full range of optional
brackets, it can be installed on all type of door frames such as
Hollow, Wooden door. It is the best choice for electronic
security industry and system integrators.
available by special order), and with the full range of optional
brackets, it can be installed on all type of door frames such as
Hollow, Wooden door. It is the best choice for electronic
security industry and system integrators.
Voltage Tolerance: 15%
Current Draw: 340mA@12Vdc (at temperature 20C)
Current Draw: 340mA@12Vdc (at temperature 20C)
Magnetic bond sensor monitor output (EM-750R)
(SPDT rated 0.25A@12V DC), remotely monitors the door
lock or unlock status. (N.C. Output--Door opened; N.O.
Output--Door closed)
Operating Temperature: -10~55C )14~131F(
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the power is on):
(SPDT rated 0.25A@12V DC), remotely monitors the door
lock or unlock status. (N.C. Output--Door opened; N.O.
Output--Door closed)
Operating Temperature: -10~55C )14~131F(
Humidity: 0~95% non-condensing.
Lock's surface Temperature (when the power is on):
<current temperature +20C
Holding Force: Up to 800 lbs )363 Kg(
Dimensions:
Dimensions:
Magnet:(L) 230, (W) 46, (D) 30 mm
Armature Plate:(L) 185, (W) 45, (D) 14 mm
Special Finishes for magnet and armature plate: Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight )Approx.(: 3.0 Kg
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight )Approx.(: 3.0 Kg
(Further notice for diverse input voltage on special order requirement)
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw