Gianni Industries EM-NH2300 Leaflet
Statement
Features
Specifications
The NH series electromagnet lock is an important mounting
plate design breakthrough. The mounting plate is designed
with a well engineered sliding mechanism that makes
electromagnet considerably easy to clasp the mounting plate
to allow security of use and maximize the ease of installation.
with a well engineered sliding mechanism that makes
electromagnet considerably easy to clasp the mounting plate
to allow security of use and maximize the ease of installation.
GIANNI INDUSTRIES, INC.
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-EM-NH2300 Ver. D Published on 2008.08.18
DM-CA-EM-NH2300 Ver. D Published on 2008.08.18
The products are manufactured under an ISO
9 0 0 1
9 0 0 1
Q C
0 8 0 0 0 0
C e r t i f i e d
Q u a l i t y
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
product quality, performance and commitment
to customer satisfaction.
&
Operating Features
EM-NH2300M-TD
: Re-locking time delay
Relocking Time Delay Switch ensures
the automatically turns to lock mode
after the door is closed properly and it
can be adjusted from 0 to 90 seconds.
the automatically turns to lock mode
after the door is closed properly and it
can be adjusted from 0 to 90 seconds.
lll
N.O.
COM.
N.C.
Power
Input
SPDT
relay
3A@12VDC
Timer Adjust
Shorten
Trigger
EM-NH2300M
: Bond sensor output & Status LED
Bond sensor is used to indicate the door
status as in a locked or unlocked condition.
status as in a locked or unlocked condition.
is a visual feedback for user to
give the true status of the lock at any time.
Green light indicates the door is insecure
Green light indicates the door is insecure
Status LED
Bond sensor monitor output : SPDT rated: 3A@12VDC
Fasten the mounting plate on
t h e
t h e
s i t e
t h e n
i n s t a l l
e l e c t r o m a g n e t l o c k w i t h
power lead cable through
mounting plate slot hole.
power lead cable through
mounting plate slot hole.
For assembling the mounting
plate and the electromagnet
lock into the groove, please
m a k e t h e m a r k o n t h e
mounting plate and the mark
on the electromagnet lock
itself to be a straight line for
alignment. Either aligning
from left side or from right
side is feasible.
plate and the electromagnet
lock into the groove, please
m a k e t h e m a r k o n t h e
mounting plate and the mark
on the electromagnet lock
itself to be a straight line for
alignment. Either aligning
from left side or from right
side is feasible.
Slide the electromagnetic
lock to fit with the mounting
plate as the drawing. Once
t h e
lock to fit with the mounting
plate as the drawing. Once
t h e
c o r r e c t
p o s i t i o n
i s
encountered, use the Allen
Wrench to fasten the fixing
screws through the bottom of
the electromagnet lock into
the mounting plate.
Wrench to fasten the fixing
screws through the bottom of
the electromagnet lock into
the mounting plate.
A f t e r t h e e l e c t r o m a g n e t
firmly assembled with the
m o u n t i n g p l a t e , u s e t h e
screws to fasten the lock on
the site permanently.
firmly assembled with the
m o u n t i n g p l a t e , u s e t h e
screws to fasten the lock on
the site permanently.
Cable
Special Mounting Plate design
EM-NH2300
Double Mini Electromagnetic Lock
Double Mini Electromagnetic Lock
MOV provides spike and surge protection.
Magnetic bond sensor monitor output.
Anodized aluminum housing.
Groove template & housing for easy installation.
Dual voltage 12 or 24 VDC selectable
Anti-Residual magnetism designed.
Complete mounting hardware included.
Magnetic bond sensor monitor output.
Anodized aluminum housing.
Groove template & housing for easy installation.
Dual voltage 12 or 24 VDC selectable
Anti-Residual magnetism designed.
Complete mounting hardware included.
)
(.
Voltage Tolerance: 15%
Current Draw :500mA x 2@12Vdc 250mA x 2
@24Vdc )at 20 degree centigrade(
Operating Temperature from -10 to 55 degree
centigrade
Humidity: 0~95% non-condensing.
Holding Force: Up to 600 lbs x 2 (272 Kg x 2)
Dimensions:
Current Draw :500mA x 2@12Vdc 250mA x 2
@24Vdc )at 20 degree centigrade(
Operating Temperature from -10 to 55 degree
centigrade
Humidity: 0~95% non-condensing.
Holding Force: Up to 600 lbs x 2 (272 Kg x 2)
Dimensions:
Magnet:(L) 500, (W) 46, (D) 25 mm
Armature Plate:(L) 185, (W) 38, (D) 12 mm
Mounting Plate:(L) 500, (W) 25, (D) 5 mm
Finishes for magnet and armature plate: Zinc
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight (Approx.): 4.0 Kg
Epoxy Potting Compound: E87252 (S), UL94V-0
Weight (Approx.): 4.0 Kg
Patent
ZL 2006 2 0122522.X (China)
Nr. 20 2006 012 052.1(Germany)
M308308 (Taiwan)
GB 06 1 6099.8 (Great Britain)
06 07229 (France)
Nr. 20 2006 012 052.1(Germany)
M308308 (Taiwan)
GB 06 1 6099.8 (Great Britain)
06 07229 (France)
Patent:
ZL 2006 2 0122522.X
Nr. 20 2006 012 052.1
M308308
GB 06 1 6099.8
06 07229 (France)
ZL 2006 2 0122522.X
Nr. 20 2006 012 052.1
M308308
GB 06 1 6099.8
06 07229 (France)
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw