Gianni Industries Keyprox Plus User Manual

Page of 3
GIANNI INDUSTRIES, INC.
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-Keyprox Plus Ver. B Published on 2008.05.21
The products are manufactured under an ISO
9 0 0 1
Q C
0 8 0 0 0 0
C e r t i f i e d
Q u a l i t y
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
Statement
Features
Keyprox Plus
Access Control System
The software is required for all programming of the system,
downloading transaction sand printing
Reports.
The system is based on a controller
that supports two Secure Card readers
which can be mounted up to 50 meters
from the controller with a simple 3-wire
c o n n e c t i o n . T h e c o n t r o l l e r c a n b e
configured to operate a single door or two
independent doors.
T h e c o n t r o l l e r h a s a R S - 2 3 2
connection allowing single controller
systems a simple means of connecting to
a PC provided the cable run is less than
30 meters. The controller also has a RS-
485 connection that will support up to 16
c o n t r o l l e r s c o n n e c t e d i n a R S - 4 8 5
network to a PC thus allowing the control
of up to 32 doors.
In this configuration the PC will require
a 311 RS-232/485 Interface/Repeater to
Controller supports two readers.
Controller can control 2 independent
doors or a single door.
Use RS-232 or RS-485 to connect a
single controller to a PC.
Up to 16 controllers can be connected
using a RS-485 network to a PC.
Up to 32 independent doors can be
controlled.
The system supports 2000 tags.
E a c h
c o n t r o l l e r
s t o r e s
l a s t
2 0 0 0
transactions with date & time stamp in
non-volatile memory. All transactions -
including denied access, pushbutton and
alarm conditions are logged.
Optional Door Switch allows use of 4
t i m e r s
t o
s o l v e
c o m p l e x
l o c k i n g
problems.
Optional Exit Push Button for each door.
Access control is achieved by assigning a
user an Access Parameter.
There are 2 predefined and 8 user
defined Access Parameters. User defined
parameters consist of 5 time zones for
each day of week +holiday during which
Free Software !!
655-20
Controller
656-20-1
Secure Mini Reader
657-20-1
ANSI-sized Reader
311-30
RS-485 to RS-232
convertor
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: info@gianni.com.tw
Website: gianni.tw