FIELD CONTROLS UV-E User Manual

Model: UV-E 

(For use with 12”, 18” and 28” Field Controls Lamps) 

LEAVE

 

THE

 

INSTALLATION

 

INSTRUCTIONS

 

WITH

 

THE

 

OWNER/OPERATOR

 

OF

 

THE

 

DEVICE 

AFTER

 

OPENING

 

THE

 

CARTON,

 

UNPACK

 

AND

 

INSPECT

 

THE

 

UNIT

 

AND

 

LAMP

 

FOR

 

DAMAGE. 

INSTALL

 

THIS

 

UNIT

 

IF

 

ANY

 

DAMAGE

 

IS

 

NOTICEABLE. 

 

WARNING:  Never expose eyes or skin to UVC light from any source. 

•  Looking directly at the UVC light may cause permanent eye damage or blindness.  

•  Never operate the UV-Aire™ Air Purifying System out of the plenum. 

WARNING: UV light will break down plastic materials not rated for UV exposure: 
(Examples: wire insulation, flex duct, drain pans and humidifiers) 

•  The unit must be mounted at least 30” from the above stated type of materials. 

•  If it is necessary to mount the unit in direct line of site of these types of materials, they must be shielded 

with aluminum foil, aluminum foil tape, or sheet metal. 

 

1-UV-E power unit  (NEMA3 housing)
1-Mounting Template 
4-Sheet metal mounting screws 
1-Angled mounting bracket  
1-Flat mounting bracket 
1-Instruction Sheet 
1-Wing nut 
2-Hex nuts 
1-Lamp 
 

UV-C light inhibits the growth and reproduction of germs and bacteria that circulate through a 
homes’ heating and air conditioning system.  The treatment is a safe, silent, and proven way 
to make your home a healthier place to live.