Hunter Fan 30772 User Manual

4

43083-01   11/21/2011

Dust and other irritants are pulled into the air 

purification system by the fan. The carbon 

pre-filter attracts larger particles like, pet 

dander, hair, and odor causing particles 

and traps them on the pre-filter. Smaller 

particles such as dust, mold, and pollen pass 

through the pre-filter and are captured by the 
HEPAtech

®

 filter. Up to 99.97% of particles 

as small as .1 microns can be captured. 

The ionizer charges any remaining particles 

causing them to clump together and fall to the 

floor or surface where they can be removed 

by cleaning. Clean, purified air is then 

released into the room through the side grill. 

(Figure 2.)

5. Place the bottom of the grill back into the 

indention in the base and push the door 

back into place.

6. Plug the unit into a 120V electrical outlet.

NOTE: DO NOT run the ionizer if tobacco 

smoke, air fresheners, dripless wax candles, 

or grease from cooking is present. 

Pre-Filter 

Calendar

Filter 

Calendar

Ionizer 

Button

On/Off 

Speed

Control

Ionizer 

Light

On/Off 

Light 

Ring

On/Speed Control:  Rotate the Speed 

Control knob to set the desired speed.

  

     Unit off

          Low speed - Recommended for 

            use when soft background noise 

            is unwanted.

 

     Medium speed - Typical usage setting. 

            Soft background noise is not an issue.

 

 High speed - Use when quick, efficient  

            results to a room’s air quality are 

            desired. 

The fan speed can be adjusted at any time. 

While the unit is running, the light ring will 

glow to indicate the unit is on.

Press the Ionizer button to turn on the Ionizer 

function of your air purifier.  The Ionizer light 

will illuminate while the ionizer is active.