Philips AC4002 User Manual
- Press and hold the reset button for filter 3/4 for 2 seconds if you have
replaced filter 3 (activated carbon filter) and 4 (HEPA filter).
, You hear a beep and the appliance starts operating in the auto mode
again.
Accessories
New filters are available under the following type numbers:
Filter
Type number
Filter 2: multi-care filter
AC4121
Filter 3: activated carbon filter
AC4123
Filter 4: HEPA filter
AC4124
AC4002 only: adding the multi-care filter
AC4002 comes with the pre-filter, activated carbon filter and the HEPA
AC4002 comes with the pre-filter, activated carbon filter and the HEPA
filter. For this appliance, only the filter cleaning light of filter 1 (pre-filter)
and the filter replacement light of filter 3 and 4 (activated carbon filter and
HEPA filter) have been activated.
If you want to enjoy the benefits of the multi-care filter, you can purchase
this filter separately (see the table above). In combination with the HEPA
filter, the multi-care filter filters out dust, pollen and ultrafine particles
larger than 20 nanometres, including bacteria and some viruses. According
to publications of the World Health Organization, the avian and human
influenza viruses and Legionella bacterium are larger than 20 nanometres.
After installing the multi-care filter, you have to activate the filter
replacement indication of filter 2 in the following way:
1
Simultaneously press and hold the reset button for filter 1 (pre-filter)
and the reset button for filter 2 (multi-care filter) for 2 seconds.
- To deactivate the filter replacement indication of filter 2,
simultaneously press and hold the reset button for filter 1 (pre-filter)
and the reset button for filter 2 (multi-care filter) for 2 seconds.
Note: To check whether the filter replacement indication of the multi-care filter
is active or not, press the reset button for filter 2. If the filter replacement light
of filter 2 goes on for a few seconds, the filter replacement indication of the
multi-care filter is active. If the filter replacement light of filter 2 does not go
on, the filter replacement indication is not active.
English
21