Airpura Industries R600 Leaflet

To vacuum the pre-filter

Filter Maintenance and Replacement 

The HEPA Filter

 

Use the brush attachment on your vacuum cleaner
Vacuum slowly around the mesh surface of the filter chamber

The Pre-Filter 

The Activated Carbon Filter

Can be vacuumed from the exterior of the unit
once a month or more often.
Should be replaced at least after 12 months of use

Should be replaced at least every 3 to 5 years of normal 
use 

Turn over 
the Airpura 

Remove the 
4 retaining 
screws

Take off 
the cover

To open the filter chamber

Remove the 
gasket

Unfold the filter slider

(Supplied with replacement 
filters or on request 
Part#6F 001)

Roll it into a spiral

Insert the tube into 
the filter chamber 
inside the pre-filter

Let the spiral open 
to fill the opening

Open the top of 
the spiral to make 
a slight funnel

Insert the carbon 
canister into the 
funnel and hold it 
straight

Let the canister 
slidedown the 
filter slider

Pull the filter slider up
out of the cavity using 
both hands and let the 
canister slide to the 
bottom of the cavity

Remove the filter
slider and fold it 
for further use

Place a felt gasket
at the bottom of the 
filter chamber

Position the pre-filter
inside the filter chamber 

See over for 
closing the 
filter chamber

Slide in the 
Hepa filter

Should be changed as needed in heavy applications and 
at least every 24 months in normal use.