Vermont Casting EWF36CLK Leaflet

Installation Instructions

Install the louvre kit after all other fireplace installation 

work has been completed, thoroughly checked and 

tested for proper operation and installation require-

ments.

Compare contents shown in Figure 1 with actual parts 

received. If any parts are missing or damaged, contact 

your local dealer before starting installation.
Louvre Kit Parts:
Basic universal (4) 

20006024

Hinge Cover (2) 

20005994

1/4 - 20 x 1/2” phillips round head screw (4)

Instruction sheet
Tools required: phillips screwdriver, needlenose pliers

1.  Insert each basic universal into openings in fire-

place. Be sure the damper tabs have engaged plate 

sheet steel flanges in openings. NOTE:  The damper 

tabs always point down. (Fig. 2)

2.  Before inserting upper right panel, push the damper 

handle in flush with face. Once the panel is in place, 

use needlenose pliers to pull damper handle out 

through lattice in panel. 

3.  Adjust the panels for a symmetric appearance.

1.  Align hinge cover on outside of hinge with holes 

located in the hinge. (Fig. 3)

2.  Attach hinge cover using screws provided.

KT400

Lattice 

view from behind

5/03

Damper Tab

(Always point down)

Basic Universal

KT400

Fig. 2  Place basic universal, making sure the damper tabs 

engage plate steel metal flanges of fireplace.

Metal Flanges

Upper Panel Orientation

Lower Panel Orientation

KT401

Hinge install

6/3/03   djt 

Hinge

Screws

Hinge Cover

Hinge cover 

will cover this 

area.

KT401

Fig. 3  Install hinge cover.

CAR153

EWF36CLK

Cast Lattice

Kit

6/3/03  djt

Basic Universal 

(4)

1/4 - 20 x 1/2” 

Phillips Round 

Head Screws 

(4)

Hinge Cover (2)

CAR153

Fig. 1  Carton contents.

Thicker side 

toward the 

top for top 

installation

Thicker 

side toward 

the bottom 

for bottom 

installation

20006092  8/08  Rev. 4

149 Cleveland Drive • Paris, Kentucky 40361

www.mhsc.com