Monessen Hearth ILDV30NV User Manual

16

The manifold is shipped attached to insert. It may be removed to allow tight installation. 
1.  Remove glass door assembly following instructions on Page 29, Figure 34.
.  Lightly tap on flange of exhaust baffle assembly towards you until disengaged. Remove baffle, manifold 

and gasket from unit. Figure 10

3.  ILDV0: Attach the solid closed baffle plate. ILDV30: Attach the slotted baffle plate. Figure 11
4.  Feed exhaust flex through hole on top of insert and attach to manifold with hose clamp (not provided) or 

other approved methods (check local codes). Insure the gasket is in place before securing the flex to the 
manifold.

5.  Re-attach exhaust baffle and manifold assembly in reverse order of Step . 
6.  Re-attach glass door in reverse order.
NOte: Insert has an adjustable baffle and may be adjusted as needed by loosening four (4) screws. Figure 
11

FP1960
manifold assembly
9/08

Gasket

Manifold

Baffle Assembly

FP1960

Flex Vent

FP1961
baffle adjustment
9/08

fp2156
ILDV baffle assembly
12/08

Baffle 
Assembly

Baffle Plate
(For ILDV0)

FP156

Loosen Four (4) 
Screws to Adjust

FP1961

NOte: Make sure the correct 
baffle plate is used.