Monessen Hearth ILDV30NV User Manual
3
83D0511
ILDV20/ILDV30 Fireplace Insert
Make sure the gas valve knob is in the “OFF” position. Wait at least five (5) minutes before
start-ing maintenance.
start-ing maintenance.
VeNtiNG SySteM
A qualified agency should examine the venting system annually.
cLeANiNG GLASS
Clean the ceramic glass periodically. Condensation will sometimes form on the glass during a
cold startup. This is normal for all gas fireplaces and inserts. This condensation often attracts
dust and lint to the surface of the glass. The initial paint curing of the appliance can also leave
a slight film on the glass. This is a temporary problem.
You should clean the glass after the first two weeks of use. After that, you should clean the
glass no more than two or three times a season. Use a mild glass cleaner to clean the door.
Do not use abrasive cleaners. They will damage the glass surface.
cold startup. This is normal for all gas fireplaces and inserts. This condensation often attracts
dust and lint to the surface of the glass. The initial paint curing of the appliance can also leave
a slight film on the glass. This is a temporary problem.
You should clean the glass after the first two weeks of use. After that, you should clean the
glass no more than two or three times a season. Use a mild glass cleaner to clean the door.
Do not use abrasive cleaners. They will damage the glass surface.
PiLOt AND BuRNeR FLAMeS
Visually check pilot and burner flames periodically. Refer to Figure 36 for typical burner flame.
Refer to Figure 37 for typical pilot flame.
Refer to Figure 37 for typical pilot flame.
cLeANiNG and MAiNteNANce
LG535
ILDV log flame
9/08
ILDV log flame
9/08
Figure 36
Typical Burner Flame
Typical Burner Flame
LG535
FP1943
pilot flame
pilot flame
Thermocouple
Thermopile
FP1943
Figure 37
Typical Pilot Flame
Typical Pilot Flame