Monessen Hearth HBDV400 User Manual

32 

Glass Frame 

Clamps

1.  Release two clamps on bottom of fireplace. See Figure 44. 
2.  Tilt glass frame out and lift glass frame up until it clears three tabs on top of fireplace.
3.  Set glass frame aside. 

1.  Remove glass door frame and log set.
2.   Remove the glass heat shield, baffle and rear bracket.
3.  Install the center fi rebrick panel on the back wall fi rst. Stand fi rebrick panel straight up against the back of fireplace 

with the bottom edge at bottom of inner fi rebox.

4.  Repeat Step 3 with the left and right side firebrick panels. Secure the top of each side fi rebrick panel to the fi replace with 

one retainer bracket and one screw. 

5.  Use a screw gun to drive in the self-drilling screw into the sheet metal through the hole in the retainer bracket.
6.  Re-install glass heat shield, baffle and rear bracket.
7.   Re-install glass door frame and log set.