Monessen Hearth IDV380NVC User Manual
57D0016
33
FIREBOX CLEANING
CLEANING
AND
MAINTENANCE
1. Carefully remove log set, and embers from combustion chamber.
2. Vacuum burner compartment thoroughly.
3. Vacuum any dust off logs.
4. Remove any lint from main burner and pilot.
5. Carefully replace log set, and embers in their correct positions. See pages 21 through 23 .
6. Replace door.
7. Relight pilot. See page 28.
8. Turn on main burners.
2. Vacuum burner compartment thoroughly.
3. Vacuum any dust off logs.
4. Remove any lint from main burner and pilot.
5. Carefully replace log set, and embers in their correct positions. See pages 21 through 23 .
6. Replace door.
7. Relight pilot. See page 28.
8. Turn on main burners.
MAINTAINING YOUR HEATER’S APPEARANCE
Fingerprints or other marks left on optional gold or nickel surface may become etched in place if they are not wiped clean
prior to turning stove on. Clean gold or nickel with a 50/50 vinegar and water solution and soft cloth.
NOTE: Make sure heater is cool before cleaning. Using cleaners other than a 50/50 vinegar and water
NOTE: Make sure heater is cool before cleaning. Using cleaners other than a 50/50 vinegar and water
solution may leave a film that becomes permanently etched into the gold or nickel.
• Let logs cool before cleaning. Logs reach high temperatures.
• Make sure that clearances to combustibles leave enough room for maintenance
• Make sure that clearances to combustibles leave enough room for maintenance
and service.
• Carefully reassemble and reseal insert properly after any cleaning or servicing.
W
ARNING