Monessen Hearth MJ27PR User Manual

Page of 40
86D0024
23
PLACE ROCk wOOL 
Before installing logs, place rock-
wool  in  dime  size  pieces  evenly 
over  small  burner  ports  starting 
in front of the rear deflector shield 
towards  the  front. Avoid  placing 
rock  wool  over  the  slots  on  rear 
and  right  side  of  burner  and  on 
large yellow flame ports on front 
of burner.
Wash  hands  after  placing  rock 
wool. Itching may occur.
LOG PLACEMENT
Before you begin — This unit is supplied with seven (7) ceramic fiber logs. Do not handle these logs with your 
bare hands. 
Always wear gloves to prevent skin irritation from ceramic fibers. After handling the logs, wash 
your hands gently with soap and water to remove any traces of fibers.
W
ARNING
The positioning of the logs is critical to the safe and clean operation of this heater. Sooting and 
other problems may result if the logs are not properly and firmly positioned in the appliance. 
Never add additional logs or embellishments such as pine cones, vermiculite or rock wool to 
the heater. Only use the logs and 2G-Rw rock wool. 
Failure to position the parts in accordance with diagrams below or to use only parts specifically 
approved for this heater may result in property damage or personal injury.
Dime-Sized  
Pieces of Rock 
Wool 
FP2011
place rock wool
FP2011
Figure 18 - Place Rock Wool 
LG552
ember placement
10/08
Figure 19 - Correct Rock Wool Placement
LG552
W
ARNING
• Use only rock wool 
provided with log set. 
• Do not add additional 
rock wool.