Monessen Hearth 36CDVXTRN User Manual

30

,'
#$68

The 36CDVX logs are shipped in place. If a log is 
broken, refer to the replacement parts list for a replace-
ment. Figure 63 shows where the logs are secured to 
the fireplace.

RN/RP & EN/EP Models
For units equipped with “HI/LO” valves the flame 
adjustment is accomplished by rotating the “HI/LO” 
adjustment knob located near the center of the gas 
control valve. (Figs. 64)

It is important to periodically perform a visual check 
of the pilot and burner flames. Compare them to the  
illustrations. (Figs. 65 & 66)
If the flame patterns appear abnormal contact a 
qualified service provider for service and adjustment.

FP390

FLAME ADJUSTMENT KNOB

11/21/96

Turn 

counterclockwise

to increase

flame height

Turn clockwise

to decrease

flame height

Fig. 64  Flame adjustment knob for SIT valve.

FP1541

Fig. 65  Correct pilot flame appearance.

&0
3)4

Lava Rock

Ember Material

Separate the ember material into small pieces, roughly 
1/2” in diameter and place on the front burner tube. Do 
NOT pack down, leave in fluffy, loose condition for most 

realistic ember effect. (Fig. 62)
The lava rock provided with this fireplace 
must be placed on the firebox base 
around the burner assembly. (Fig. 63)

Under no circumstances should this lava 

rock be placed on any part of the burner.

LG480

,'
#$68

Red Glow, Yellow Tips

LG481

Yellow Flame