Hearth & Home Technologies Everest User Manual

Heat & Glo  •  Everest  •  750-900  Rev. o  •  10/08

16

To attach the fi rst vent component to the starting collars 
of the fi replace:

•  Make sure that the fi replace gasket supplied with the 

fi replace seals between the fi rst component and the outer 
fi replace wrap.

•  Refer to Cinch Pipe and Termination Cap installation 

instructions.

If your vertical vent component is over 10 feet, you may 
want to install the included vertical baffl e to improve fl ame 
appearance. Vertical baffl e is located in the bag containing 
the instruction manual. Center the vertical baffl e on the fi ve 
inch vent being used, and with self tapping screws secure 
the baffl e to the inside of the fi rebox  (see Figure 10).

With vent runs of 30 feet or more without elbows, an 
additional baffl e (SRV750-152) is to be used with the 
supplied baffl e. This is a service part and is to be purchased 
separately.

Refer to Cinch Pipe and Termination Cap installation in-
structions.

If the installation is for a termination cap attached directly 
to the fi replace, skip to the sections, Install Firestops and 
Vent Termination.