Hearth & Home Technologies CUMBGAP-PMH User Manual
Page 18
7006-188E
R
Cumberland Gap
Wood Stove
BENDING TEMPLATE
STRAIGHT END
CUT ENDS
Cut Ends
Hand Bend #1
Cut Ends
Straight End
Hand bend #2
Lay the flat diverter on the
template with the cut ends
at the bottom of the tem-
plate.
template with the cut ends
at the bottom of the tem-
plate.
HAND BEND #1
Bend the diverter to match
the same degree bend as
in the template.
Bend the diverter to match
the same degree bend as
in the template.
HAND BEND #2
Bend the diverter 90° to
complete the process.
Bend the diverter 90° to
complete the process.
Place diverter on tem-
plate to confirm the bends
match the template.
plate to confirm the bends
match the template.
Baffle Diverter
is shipped
inside firebox.
WARNING
Risk of Fire.
Required on all rear horizontal
installations.
installations.
Excessive smoke or flame spillage
into the room may occur.
into the room may occur.