Hearth & Home Technologies TIARAI-BK-B User Manual

August 1, 2008

Page  37

Heat & Glo · Tiara I B & Tiara II B · 7010-149M

TOOLS REQUIRED:   Phillips head screwdriver.

KIT CONTENTS:  (2) Warming shelves, (2) brackets, and (4) 
1/4 in. (Phillip head screws.

Remove warming shelves and hardware from 

packaging.  Install leveling screw to each warming shelf.

Install warming shelf bracket loosely to each 

warming shelf using the screw provided. 

Gently lift cast top off of appliance and set aside.  

Install warming shelf to appliance gently aligning the shelf 
with the tabs that are in place on the side of the appliance. 
Use the leveling screw located in the center of the warming 
shelf to adjust the shelf to its desired position. 

Align bracket to fi rebox and gently tighten the 

screw to hold it in place.  Reassemble the appliance.

1. 

Turn appliance OFF and let cool down before replacing 
the glass.

2. 

Remove the front by lifting upwards 1/2 in. (13mm) and 
away from the appliance.

3. 

Tiara I-B: Remove the glass door by opening the latches 
located on both the left and right sides at the bottom of 
the glass.  Pull towards you and separate latches from 
notches.

 

Tiara II-B: Remove the glass door by opening the 
latches located on both the left and right sides at the 
top of the glass. Pull towards you and separate latches 
from notches. Lift the glass out of the two notches at its 
bottom and carefully set aside.

4. 

The new glass will come installed in a new glass frame. 
Installation of the new glass and frame is the opposite 
of the removal.

5. 

Reinstall appliance front.

Handle glass assembly with care.

•  Inspect the gasket to ensure it is undamaged.
•  Inspect the glass for cracks, chips or 

scratches.

•  Do NOT strike, slam or scratch glass.
•  Do NOT operate appliance with glass door 

removed, cracked, broken or scratched.

•  Replace glass assembly as a complete 

assembly.