Hearth & Home Technologies SL-350TRS-CE-D User Manual

Heat & Glo  •  SL-350TRS-CE-D  •  2033-900  Rev. N  •  10/07

38

Ember material is shipped with this gas fireplace. The bag
labeled Glowing Ember (050-721) is standard glowing ember
material. To place the ember material:

• Remove latches and tension springs around the glass door.

• Remove the glass door from the unit (Figure 44).

• Place small pieces of ember material on burner top around

burner ports (Figure 33). Do NOT press embers into
burner ports. Cover the top of the burner with a single
layer of ember material. Do NOT place embers behind
the rear port row as noted in Figure 45.

• Save the remaining ember materials for use during fireplace

servicing.

• Replace the glass door and a front trim door on the unit

(see Replacement Parts Section of the manual.)

• Replace the latches and tension springs.

Place log #6 against the second and third grate bars.

 If sooting occurs, the logs might need to be repositioned slightly to avoid excessive flame impingement.