Hearth & Home Technologies 839-1440 User Manual

Page  34

                 September 1, 2008

Quadra-Fire · Sapphire · 250-7233H

•  Follow ember placement instructions in 

manual.

•  Do NOT place embers directly over 

burner ports.

•  Replace ember material annually.

Explosion  Risk.

Improperly placed embers interferes with proper burner 
operation.

   Place individual pieces of embers in front of and 

around the gas log where they can be seen. Space them so 
that gas can contact them on all sides. Avoid stacking the 
embers on top of each other. 

NOTE: Do not block gas ports.

FROM THE KIT YOU WILL NEED: Blower motor; snap 
disc bracket with wire harness; rheostat, rheostat nut; knob; 
screws; 1 zip-tie.  

TOOLS REQUIRED:  #2 Phillips head bit; hand drill; 11/16 
in. wrench.

Mount blower to rear of the appliance using two 

screws.

Beneath the appliance from its front side, ensure 

that all wiring is moved behind the blower mounting bracket 
which already comes installed on the bottom of the appli-
ance.  Complete blower mounting by inserting two screws 
through the blower into the mounting bracket.  Make the wire 
harness connection.

Remove the glass door assembly by opening latches at the 
bottom front of the appliance, on both the left and right sides. 
Lift out and away from the appliance.

Replace with a new glass door assembly. 

Handle glass assembly with care.

•  Inspect the gasket to ensure it is undamaged.
•  Inspect the glass for cracks, chips or 

scratches.

•  Do NOT strike, slam or scratch glass.
•  Do NOT operate appliance with glass door 

removed, cracked, broken or scratched.

•  Replace glass assembly as a complete 

assembly.