Hearth & Home Technologies CASTILE-GAS-PMH User Manual

September 1, 2008

Page  29

Quadra-Fire · Castile Gas Stove · 7023-111E

Remove shipping materials from inside or underneath the 
firebox.

KIT CONTENTS:  Rear vent grill.

TOOLS REQUIRED:  Power drill; #2 Phillips bit; high-temp 
silicone sealant (optional.)

   Remove top trivet, if installed.  Remove vent pipe 

adapter and gasket by removing 4 screws as indicated.  (If 
gasket breaks, apply high-temp silicone to bottom of adapter 
before installing (shown in Figure 8.4).  

   Remove the inner collar adapter.  

   Remove the rear valve cover shield.  Remove the 

rear access plate and gasket by removing four screws.  Save 
the screws.  Place the cover shield and gasket over the top 
vent and attach with the four screws previously removed.

  Insert the inner collar adapter to the rear vent 

flue.

Sharp Edges

•  Wear protective gloves 

and safety glasses during 
installation.

Install approved accessories per instructions included with 
accessories.  Refer to Section 12 for appropriate accesso-
ries.

Shock or fire risk.
Use ONLY optional accessories approved for 
this appliance.
•  U s i n g   n o n - l i s t e d   a c c e s s o r i e s   v o i d s 

warranty.

•  Using non-listed accessories may result in a 

safety hazard.

•  Only Hearth & Home Technologies approved 

accessories may be used safely.