Hearth & Home Technologies 8300 User Manual

HearthStone Quality Home Heating Products Inc

                                                                   Champlain 

Model #8300

 

 

29

4.  Gently place the Middle Log (2) in 

the firebox against the front of the 
Rear Log. There are slots on the 
underside that fit in between the 
burner tube and into the burner tube 
holder. The rear tabs on the Middle 
Log should touch the front of the 
Rear Log, and the log should be 
centered as best as possible. 

5.  Place the Ember Screen (3) on the 

front of the burner tube with the long 
side of the Screen on the tube. The 
short tab should be facing forward on 
the bottom of the firebox. 

6.  Gently place the Front Log (4) in the 

firebox against the front of the 
burner tube. Center as best as 
possible. 

7.  Spread evenly across the Ember 

Screen, the Charcoal Embers (5). 

8.  Gently place the Top Log (6) in the 

firebox on top of the Middle Log. 
The Middle Log has 2 posts, which 
slide into the 2 holes on the 
underside of the Top Log. The “leg” 
on the Top Log points towards the 
rear. 

9.  With logs in place, place the glass 

and frame back on the firebox. Slide 
the clips down securing the glass to 
the firebox. 

10. Grasp the cast façade and slide the 

top edge under the lip of the  top 
castings. Push the bottom of the 
façade in towards the firebox. While 
pushing in, pull the latch down to 
secure the façade to the firebox.

 

 

Sediment Trap