Hearth & Home Technologies C-40 User Manual

Page  2

Heatilator • Constitution EPA Fireplace • 480-1091C

November 11, 2008

Read this manual before installing or operating this appliance.

Please retain this owner’s manual for future references.

Congratulations  on  selecting  a  Heatilator  wood  burning 

fireplace.  The  Heatilator  fireplace  you  have  selected  is 

designed  to  provide  the  utmost  in  safety,  reliability,  and 

efficiency.

As the owner of a new fireplace, you'll want to read and 

carefully  follow  all  of  the  instructions  contained  in  this 

Owner's Manual. Pay special attention to all Cautions and 

Warnings.

This Owner's Manual should be retained for future reference.

We  suggest  that  you  keep  it  with  your  other  important 

documents and product manuals.

Your  new  Heatilator  wood  burning  fireplace  will  give  you 

years of durable use and trouble-free enjoyment. Welcome 

to the Heatilator family of fireplace products!

Model Name: ___________________________________________ Date purchased/installed: __________________

Serial Number: __________________________________________ Location on appliance: ____________________

Dealership purchased from:  _______________________________ Dealer Phone:  __________________________

Notes:  _______________________________________________________________________________________

_____________________________________________________________________________________________

 

C

ONSTITUTION  

E

PA 

C

ERTIFIED 

F

IREPLACE 

LISTED  FIREPLACE,  SOLID  FUEL  TYPE,  ALSO  SUITABLE  FOR  MOBILE 

HOME INSTALLATION.  (UM) 84 HUD. 

Install and use only in accordance with manufacturer's installation, venting and operating instructions. 

Any area incorporating warm or cold air ducts shall be enclosed in accordance with the manufacturer's 

installation instructions. 

Contact  Your  Local  Building  Or  Fire  Officials  Or  Authority  Having  Jurisdiction  About  Restrictions, 

Installation Inspection And Permits Required In Your Area. 

WARNING - For Mobile Homes:  Do not install in a sleeping room.  An outside combustion air inlet must 

be provided and unrestricted while unit is in use.  The structural integrity of the mobile home floor, ceiling 

and walls must be maintained.  The fireplace needs to be properly grounded to the frame of the mobile 

home.    

Components  required  for  installation:    HTI  SLSeries  Pipe, Termination  Cap,  Hearth  Extension  and  required 

accessory Chimney Air Kit Part CAK4A. 

Do not connect this unit to a chimney serving another appliance. 

DANGER:  Risk of electrical shock.  Disconnect power supply before servicing. 

Electrical Rating:  115 VAC  <3.0 AMPS   60 Hz 

Do not use grate or elevate fire.  Build wood fire directly on firebrick. 

Do not overfire.  If heater or chimney connector glows, you are overfiring. 

Do not use a fireplace insert or other products not specified for use with this product. 

WARNING - THIS FIREPLACE HAS NOT BEEN TESTED WITH AN UNVENTED GAS LOG SET OR ANY LOG SET.  

TO REDUCE RISK OF FIRE OR INJURY, DO NOT INSTALL AN UNVENTED GAS LOG SET OR ANY LOG SET INTO 

FIREPLACE. 

Must provide a source of air to prevent air starvation from combustion which could result of high levels of 

carbon monoxide. 

Replace glass only with 5mm ceramic available from your dealer. 

Optional Fire Screen Part  Mesh-EPA, may be used ONLY in USA 

Chimney  sections  at  any  level  require  a  2”  (51mm)  minimum 

air space clearance between the framing and chimney section.  

 

Appliance to backwall 

 

 

 

 1" (25mm) 

 

Appliance to sidewall 

 

 

 

 1" (25mm) 

 

Duct boots to framing 

 

 

 

 0" (0mm) 

 

Top standoffs to header   

 

 

 0" (0mm") 

 

EXPOSED SURFACES 

 

Faceplate to sidewall 

 

 

 

 16" (406mm) 

 

Remote outlet air grills to ceiling         12"(305mm) 

 

MANTEL 

 

Mantel from base of fireplace  

 

 60" (1524mm) 

 

Maximum mantel depth   

 

 

 12" (305mm) 

 

FLOOR PROTECTION 

Combustible flooring 20" (508mm) in front of and 8" (203mm) to 

either  side  of  the  fuel  opening  must  be  insulated  with 

non-combustible floor protection with a minimum thickness of 1" 

(25mm) and ("k" value = 0.43). 

 

In Canada:  The hearth extension must be installed according to 

the installation instructions. 

U.S. ENVIRONMENTAL PROTECTION AGENCY - Certified to comply with July 1990 particulate emission standards. 

2008   2009   2010   Jan  Feb    Mar   Apr    May   June  July  Aug  Sept  Oct.  Nov.  Dec.

Mfg by: 

www.heatilator.com 

SA

MP

LE

 

The model information regarding your specific appliance can

be found on the rating plate usually located in the control 

area of the appliance.