Hearth & Home Technologies 5100I-NL-B User Manual

Page 0

September 1, 2008

R 

438-0380D

1.  Install washer on door handle shaft.
2.  Slide door handle through door.
3.  Install second washer(s) as shown.
.  Install key in groove.
5.  Align groove in latch cam with key; slide latch cam 

over shaft

6.  Install locknut.
.  Install spring handle turning in a counter-clockwise 

motion to desired location on handle.

•  Do NOT overtighten lock nut.

•  Door handle needs to move smoothly.

Locknut

Door Cross 

Section 

Latch Cam

Spacing Washers

Square Key

Door Handle

Spring Handle

•  Frequency: As needed
•  By: Homeowner / Qualified service technician
•  Task: See the following instructions.

1.  Open  door  and  remove  vertical  brick  in  the  bay 

window area.

.  Reach inside firebox and loosen  hex bolts using a 

/8 inch socket wrench holding the cast in place.

3.  Only remove the 2 bolts, top and bottom on the side

closest to the firebox opening.  

4.  Open the side of the window where the bolts have

been removed and slide out glass.

5.  Slide new glass in making sure it slides into the cast 

grooves.

6.  Re-assemble in reverse order. Do not overtighten

bolts.

•  Frequency: As needed
•  By: Homeowner / Qualified service technician
•  Task: See the following instructions.

Loosen  

bolts

Remove  

bolts

Slide Window In / Out