Hearth & Home Technologies 5100I-NL-B User Manual
Page 9
5100-I ACT WOOD INSERT
R
438-0380D
September 1, 2008
In Canada a full length 6 inch (15mm) ULC S65 flue
liner required as per ULC S68.
NOTE: When installing into a masonry fireplace, the fire-
place must be built to UBC Chapter standards. Do not
remove brick or mortar from masonry fireplace to accom-
modate insert. The permanent metal warning plate pro-
vided must be attached to the back of the fireplace stating
the fireplace may have been altered to accommodate the
insert and must be returned to original condition for use as
a conventional fireplace.
Hearth Extension
A
B
C
F
E
Insert
SideW
all
Fascia or Trim
Mantel
D
Maximum Mantel Depth: 12 inches (305mm)
A
B
C
D
E
F
INSTALLATION: Masonry, Heat Circulating and *Zero Clearance
12" (305)
40" (1016)
35" (889)
7" (178)
16" (406)
8" (200)
18" (450) Canada
With 8" Mantel Deflector, Part No. 831-1530
12" (305)
27" (686)
16" (406)
7" (178)
16" (406)
8" (200)
18" (450) Canada
Maximum Mantel Depth: 12 inches (305mm)
*Zero Clearance in USA Only.
B. Clearance to Combustibles
NOTE: Clearances may only be reduced by means
approved by the regulatory authority having jurisdiction.
C. Optional Mantel Deflector
Optional mantel deflectors may be purchased from your
dealer to reduce clearances to a mantel. An 8 inch (203mm)
deflector allows a reduction down to inches (686mm).
-ANTEL
Figure 9.1
• Comply with all minimum clearances to
combustibles as specified.
• Failure to comply may cause fire.
WARNING
Fire Risk.