Hearth & Home Technologies 36EBU User Manual

 
 

 

 

The EBU series fireplaces have been tested in accordance with the UL 2021 and CSA C22.2 No. 46 standards for fixed 
and location-dedicated electric room heaters.     

Model 

Number 

Description Voltage 

Volts 

Rated Power 

Watts 

Remote 

Control 

Wall 

Thermostat 

Mesh 

Screen 

AMPS 

120Volt 

AMPS 

208Volt 

AMPS 

240Volt 

36-EBU 36” 

Standard 120/208/240 1650/2340/3025 Included Included  Included  13.75  11.25 

12.6 

42-EBU 42” 

Standard 120/208/240 1650/2340/3025 Included Included  Included  13.75  11.25 

12.6 

NOTE: Power ratings shown include the light bulbs and motor (275 watts) 

(Note: Please read all instructions before installing) 

 

1.  Rough in framing opening following the recommended dimensions (Section A: Framing). 
 
2.  Allow 8” of service cable for connecting to the junction box on the fireplace. Remove the outer jacket and strip 

the individual conductors ½” from the end. 

 

3.  Loosen the screw securing junction box cover and remove the cover. 

 

4.  Remove knockouts if necessary or use the provided cable clamp. 

 

5.  Place unit in position in the opening, level with shims if necessary and attach unit to frame using nailing flanges 

provided. 

 

6.  Unit is factory wired for 208/240 volt power supply. If 120 volt operation is required, slide the switch and 

reconfigure the wiring as covered in section C wiring. Wires L1, L2, N & G are attached to the rear of the 
junction box cable clamp for easy access. 

 

7.  Wire a dedicated, properly fused circuit with a 20amp rating for the appropriate voltage (120, 208/240).  

 

8.  Make wall mounted thermostat connections as outlined in Section C: Wiring.  

 

9.  Place all connectors inside the unit and replace the junction box cover, ensuring that the cable clamp grips only 

the jacket of service or

 

thermostat. 

 
 

7205240100REV00