Honeywell HZ-8000 User Manual

Do not use it in the areas where gasoline, paint or 

flammable liquids are used or stored.

16. Use this heater only as described in this manual. Any 

other use not recommended by the manufacturer 

may cause fire, electric shock, or injury to persons.

17. Avoid the use of an extension cord because the 

extension cord may overheat and cause a risk of fire. 

However, if you have to use an extension cord, the 

cord shall be No. 14 AWG minimum size and rated 

not less than 1875 watts.

18. Never tamper with this product or attempt to fix 

it.  Any tampering with, or modification of, this 

product can result in serious injury, death, fire or risk 

of electric shock.  Do not open, no user serviceable 

parts inside.

19. Do not remove product labels that contain warnings 

or safety instruction.

20. The output of this heater may vary and its 

temperature may become intense enough to burn 

exposed skin. Use of this heater is not recommended 

for persons with reduced sensitivity to heat or an 

inability to react to avoid burns.

21. Before cleaning, or storage, or when not in use, turn 

the unit off and unplug from the electrical outlet.

22. Place the heater on a firm, level, open surface free 

from obstructions and at least 3 feet (0.9 m) away 

from any combustible materials.  DO NOT use on an 

unstable surface such as bedding or deep carpeting.  

Be sure the heater is not in a position where it 

may be tripped over by small children or pets.  The 

heater’s rubber feet will hold it firmly in position.

•   Place the heater on a firm, level, open surface free from 

obstructions and at least 3 feet (0.9 m) away from any 

combustible materials.

•   Never leave an operating unit unattended.
•   Plug the heater into an electrical wall outlet.
•   Touch the power button ( ) to turn the heater on.

The power indicator light will illuminate. Fig. 1

•   To save up to 35% in energy bills, turn the Energy 

Smart™ knob to your desired temperature.  There are four 

distinct settings of 65°F/18°C, 70°F/ 21°C, 75°F/23°C, and 

80°F/26°C.  The Energy Smart™ heater will automatically 

select the appropriate power level to best accommodate 

your desired temperature. As the air temperature in 

the room approaches the set temp, the heater will 

automatically lower the power consumption and provide 

consistent warmth without wasting energy.

•   The illuminated LED lights will indicate what the current 

room temperature is.

•   This heater is equipped with a “frost watch” which automatically turns the unit on if the temperature drops below 55°F/12°C 

degrees to help protect against freezing pipes or frost damage

•  To override the Energy Smart™ feature and produce maximum heat, turn the knob fully clockwise   to “High”.  This will 

produce 1500W of heat at all times.

•  To turn on the oscillation feature, press the ( ) button once.  To turn it off, press the ( ) button once more.  Please note, 

the oscillation function will stop when the Energy Smart™ mode has reached the desired temperature and the heater is no 

longer blowing warm air.  It will start back up when the heater starts blowing warm air again.

Power 

Button

Control Knob

Oscillation 

Button

Power Indicator Light