Sanyo CL2432 User Manual
Contents
Page
IMPORTANT!
Please Read Before Starting .................................. 1
Please Read Before Starting .................................. 1
1.
GENERAL .......................................................... 2
1-1. Tools Required for Installation (not supplied)
1-2. Accessories Supplied with Indoor Unit
1-3. Optional Copper Tubing Kit
1-4. Type of Copper Tube and Insulation Material
1-5. Field Wiring
1-6. Additional Materials Required for Installation
1-1. Tools Required for Installation (not supplied)
1-2. Accessories Supplied with Indoor Unit
1-3. Optional Copper Tubing Kit
1-4. Type of Copper Tube and Insulation Material
1-5. Field Wiring
1-6. Additional Materials Required for Installation
2.
INSTALLATION SITE SELECTION ................... 3
2-1. Indoor Unit
2-2. Outdoor Unit
2-1. Indoor Unit
2-2. Outdoor Unit
3.
HOW TO INSTALL THE INDOOR UNIT ........... 5
3-1. Remove the Rear Panel from the Unit
3-2. Make a Hole
3-3. Install the Rear Panel on the Wall
3-4. Remove the Grille to Install the Indoor Unit
3-5. Shape the Indoor Side Tubing
3-6. Wiring Instructions
3-7. Recommended Wire Length and Diameter
3-8. Wiring Instructions for Inter-unit Connections
3-9. Mounting
3-10. Drain Hose
3-1. Remove the Rear Panel from the Unit
3-2. Make a Hole
3-3. Install the Rear Panel on the Wall
3-4. Remove the Grille to Install the Indoor Unit
3-5. Shape the Indoor Side Tubing
3-6. Wiring Instructions
3-7. Recommended Wire Length and Diameter
3-8. Wiring Instructions for Inter-unit Connections
3-9. Mounting
3-10. Drain Hose
Model Combinations
Combine indoor and outdoor units only as listed
below.
below.
Indoor Unit
Outdoor Units
KS2432A
C2432
CL2432
Power supply: 60Hz, single-phase, 208/230V
INSTALLATION INSTRUCTIONS
– Split System Air Conditioner –
COOL/DRY Model
Use this manual when installing combined
models of indoor unit KS2432A and outdoor
unit C2432 or CL2432 only.
On items not included in this manual, see the
Installation Instructions (No. 85464179694003)
packed in the outdoor unit model C2432 or
CL2432.
models of indoor unit KS2432A and outdoor
unit C2432 or CL2432 only.
On items not included in this manual, see the
Installation Instructions (No. 85464179694003)
packed in the outdoor unit model C2432 or
CL2432.
Units should be installed by a licensed contractor
according to local code requirements.
according to local code requirements.
ATTENTION
4.
REFRIGERANT TUBING.................................. 13
4-1. Indoor Unit Tubing
4-2. Outdoor Unit Tubing
4-3. Connecting Tubing between Indoor and
4-1. Indoor Unit Tubing
4-2. Outdoor Unit Tubing
4-3. Connecting Tubing between Indoor and
Outdoor Units
4-4. Insulation of Refrigerant Tubing
4-5. Taping the Tubes
4-6. Finishing the Installation
4-5. Taping the Tubes
4-6. Finishing the Installation
5.
REMOTE CONTROL UNIT INSTALLATION
POSITION ......................................................... 16
5-1. Mounting on a Wall
POSITION ......................................................... 16
5-1. Mounting on a Wall
In Canada
SANYO FISHER COMPANY
SANYO Canada Inc.
A DIVISION OF SANYO NORTH AMERICA CORPORATION
300 Applewood Crescent
21605 Plummer Street
Concord, Ontario
85264189704003 © SANYO 2003 Chatsworth, CA 91311 U.S.A. L4K 5C7, Canada
W
01-386 AirCon 12/11/01 4:48 PM Page a