Fujitsu 9374379392-04 User Manual

En-10

Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
Start air conditioner operation before performing this procedure.

Press the VERTICAL AIRFLOW DIRECTION and SWING button to adjust the 
direction of the vertical airfl ow.

● Vertical air direction adjustment

Airfl ow Direction Setting:
1, 2, 3, 4: During Cooling/Heating/
 Dry 

mode

●  The vertical airfl ow direction is set automatically as shown, in accordance with the 

type of operation selected.

  During Cooling/Dry mode 

:  Horizontal fl ow 1

* During Heating mode 

:  Downward fl ow 4

● During AUTO mode operation, for the fi rst minute after beginning operation, air-

fl ow will be horizontal 1; the air direction cannot be adjusted during this period.

●  Horizontal air direction adjustment.

The function cannot be used.

●  Attempting to move up/down air di-

rection flaps manually could result 
in improper operation; in this case, 
stop operation and restart. The 
louvers should begin to operate prop-
erly again.

●  When used in a room with infants, 

children, elderly or sick persons, the air 
direction and room temperature should 
be considered carefully when making 
settings.

Each time the button is pressed, the air direction range will change as follows:

1 

 2 

 3 

 4

The remote controller’s display does not change.

Begin air conditioner operation before performing this procedure.

Press the VERTICAL AIRFLOW DIRECTION and SWING button for more 
than 2 seconds. (Stop the setting by pressing for more than 2 seconds again.)

● The SWING operation may stop temporarily when the air 

conditioner’s fan is not operating, or when operating at very 
low speeds.

Cooling/Heating/Dry/Fan

1 to 4

9374379392-04_OM.indb   10

9374379392-04_OM.indb   10

9/6/2010   10:36:30 AM

9/6/2010   10:36:30 AM