Fujitsu 9374379392-04 User Manual
En-5
To set the operation mode
● Operation mode setting
● Room temperature setting
● Fan speed setting
Lower
Rise
AUTO
COOL
DRY
HEAT
FAN
Press the MODE button to set the operation mode.
If DRY is selected, the fan speed will be set to AUTO.
If DRY is selected, the fan speed will be set to AUTO.
Temperature setting range
AUTO ................................................ 64 to 88 °F
COOL/DRY ....................................... 64 to 88 °F
HEAT ................................................ 60 to 88 °F
Press the SET TEMP. buttons to set the room temperature.
AUTO
MED
HIGH
LOW
QUIET
Press the FAN button to set the fan speed.
Press the ECONOMY button to start or stop ECONOMY OPERA-
TION.
For details on the function, refer to page 11.
TION.
For details on the function, refer to page 11.
ECONOMY OPERATION
Room temperature sensor selection
● This function is locked at the factory. In order to detect the room temperature correctly, consult author-
ized service personnel when using this function.
Press the ECONOMY button for more than 2 seconds to se-
lect whether the room temperature is detected at the indoor
unit or the remote controller.
lect whether the room temperature is detected at the indoor
unit or the remote controller.
When the
thermo sensor display appears, the room
temperature is detected at the remote controller.
NOTES
• If this function is locked, the location where the room temperature is detected cannot be changed and the
mark
fl ashes when the ECONOMY button is pushed for 2 seconds or more.
Indoor unit
OPERATION
9374379392-04_OM.indb 5
9374379392-04_OM.indb 5
9/6/2010 10:36:26 AM
9/6/2010 10:36:26 AM