Fujitsu 9319356051 User Manual
En-12
MANUAL AUTO OPERATION
Use the MANUAL AUTO operation in the event the Remote Controller is lost or when the battery runs out.
How To Use the Main Unit Controls
Press the MANUAL AUTO button
more than 3 seconds
and less than 10 seconds on indicator.
To stop operation, press the MANUAL AUTO button
for 3 seconds.
About the MANUAL AUTO button
, please see page 4.
● When the air conditioner is operated
by the controls on the MANUAL AUTO
button, it will operate under the same
mode as the AUTO mode selected on
the Remote Controller (see page 8).
button, it will operate under the same
mode as the AUTO mode selected on
the Remote Controller (see page 8).
● The fan speed selected will be “AUTO”
and the temperature setting will be stan-
dard (
dard (
76 ˚F
).
MIN. (Minimum) HEAT OPERATION
To use MIN. HEAT Operation
Press the MIN. HEAT button
.
The ECONOMY indicator lamp (green) will light.
To stop MIN. HEAT Operation
Press the START/STOP button
.
The ECONOMY indicator lamp (green) will go out.
Then the operation stops.
Then the operation stops.
About the MIN. HEAT Operation
• The Heating mode will not operate if the room temperature is high enough.
• The room temperature can be maintained at
• The room temperature can be maintained at
50 ˚F
by pressing the MIN. HEAT button
so as to prevent the room temperature from falling too far.
While MIN. HEAT OPERATION is in
progress, only the following operation
can be used.
• SET
progress, only the following operation
can be used.
• SET
To use the OUTDOOR UNIT LOW NOISE Operation
Press the OUTDOOR UNIT LOW NOISE button
.
“LOW NOISE” appears on the Remote Controller display “
”.
To stop the OUTDOOR UNIT LOW NOISE Operation
Press the OUTDOOR UNIT LOW NOISE button
.
“LOW NOISE” disappears from the Remote Controller display “
”.
Normal operation begins.
OUTDOOR UNIT LOW NOISE OPERATION
OUTDOOR UNIT LOW NOISE Operation mode reduces the noise level of the outdoor unit by suppressing the fan speed and the ro-
tation number of the compressor.
It is effective when the surrounding area is quiet, such as in the night.
tation number of the compressor.
It is effective when the surrounding area is quiet, such as in the night.
About OUTDOOR UNIT LOW NOISE Operation
• OUTDOOR UNIT LOW NOISE Operation mode can be used during cooling, heating and automatic operation. It can not be used in
FAN and DRY mode.
• OUTDOOR UNIT LOW NOISE Operation setting is saved even if the air-conditioned is stopped. Display on the remote control is
also retained.
• When the fan speed and the rotation number of the compressor of the outdoor unit have suffi ciently reduced, OUTDOOR UNIT
LOW NOISE Operation mode does not further reduce the fan speed and the rotation number of the compressor.
• Moreover, if the POWERFUL Operation is set while setting the “
” or “
” , “
” or “
” will be ex-
ecuted after the POWERFUL Operation ends.
• When outdoor air temperature is high, it may not be operated even if it has been set.
• When compressor rotational speed and fan speed are low enough, it may not be operated even if it has been set.
• When compressor rotational speed and fan speed are low enough, it may not be operated even if it has been set.
Indicator Lamp
OPERATION
ECONOMY
TIMER
: Lighting
: OFF
9319356051_OM.indb 12
9319356051_OM.indb 12
12/5/2011 3:25:37 PM
12/5/2011 3:25:37 PM