Trane RTAC 140-400 ton units (50 HZ) User Manual

RTAC-SVX01F-EN

101

The chiller screen is a summary of the chiller activity.

Auto

Stop

Chiller

Compressor

Evap Leaving Water Temperature:

Evap Entering Water Temperature:

Active Chilled Water Setpoint:

44.0 F

54.0 F

44.0 F

Active Current Limit Setpoint:

100 %

Outdoor Air Temperature:

72.0 F

Modes

Software Version:

18.0

The compressor screen displays information for the one, two, three, or four compres-
sors in the format shown. The top line of radio buttons allows you to select the com-
pressor of interest. The next three lines show the compressor operating mode. The 
compressor radio buttons and the compressor operating mode lines don’t change as 
you scroll down in the menu.

The top screen has no upward scroll keys. The single arrow down scrolls the screen 
one line at a time. As soon as the display is one line away from the top, the upward 
pointing arrow appears.

The last screen has a single arrow to scroll upward one line at a time. When in the last 
position, the single down arrow disappears.

Diagnostic Shutdown - Auto Reset

The compressor is in the process of shutdown due to a diagnostic 
that may clear automatically.

Service Tool Lockout

The compressor is in the process of shutdown due to a command 
from the TechView Service Tool to be "locked out" and inoperative.  
This setting is nonvolatile and operation can only be restored by 
using TechView to "unlock" it.

Evap Leaving Water Temperature

X.X

F / C

Evap Entering Water Temperature

X.X

F / C

Active Chilled Water Setpoint

X.X

F / C

Active Current Limit Setpoint

X

% RLA

Out Door Temperature

X.X

F / C

Software Type

RTA

Text

Software Version

X.XX

Text