GE 3200 User Manual
Important Electrical Safety—Read Carefully
Installer: Leave these instructions with the Zoneline.
Owner: Keep these instructions for future use.
Owner: Keep these instructions for future use.
•
Follow the National Electrical Code (NEC) or
local codes and ordinances.
local codes and ordinances.
•
For personal safety, this Zoneline must be prop-
erly grounded.
erly grounded.
•
Protective devices (fuses or circuit breakers)
acceptable for Zoneline installations are speci-
fied on the nameplate of each unit.
acceptable for Zoneline installations are speci-
fied on the nameplate of each unit.
CAUTION:
•
Do not use an extension cord with this unit.
•
Aluminum building wiring may present special
problems—consult a qualified electrician.
problems—consult a qualified electrician.
•
When the unit is in the STOP position there is still
voltage to the electrical controls.
voltage to the electrical controls.
• Disconnect the power to the unit before servicing
by:
1 Removing the power cord (if it has one) from the
wall receptacle.
or—
2 Removing the branch circuit fuses or turning the
circuit breakers off at the panel.
Important Notes
11
YOU WILL NEED:
• Phillips screwdriver
Zoneline Components
Exterior grille/louver**
Wall case**
Zoneline unit
Room cabinet*
*Shipped with the Zoneline unit
**Check the “Essential Elements” list on the unit