GE 5100 User Manual
•
Follow the National Electrical
Code (NEC) or local codes and
ordinances.
Code (NEC) or local codes and
ordinances.
•
For personal safety, this Zoneline
must be properly grounded.
must be properly grounded.
•
Protective devices (fuses or circuit
breakers) acceptable for Zoneline
installations are specified on the
nameplate of each unit.
breakers) acceptable for Zoneline
installations are specified on the
nameplate of each unit.
CAUTION:
•
Do not use an extension cord with
this unit.
this unit.
•
Aluminum building wiring may
present special problems—
consult a qualified electrician.
present special problems—
consult a qualified electrician.
•
When the unit is in the STOP
position there is still voltage to
the electrical controls.
position there is still voltage to
the electrical controls.
• Disconnect the power to the unit
before servicing by:
1 Removing the power cord
(if it has one) from the wall
receptacle.
receptacle.
or—
2 Removing the branch circuit
fuses or turning the circuit
breakers off at the panel.
breakers off at the panel.
Important Notes
Important electrical safety—read carefully
Zoneline Components
Exterior grille/louver**
Wall case**
Zoneline unit
Room cabinet*
Universal power
cord kit**
cord kit**
*Shipped with the Zoneline unit
**Check the “Essential Elements” list on the unit
Installer: Leave these
instructions with the
air conditioner.
instructions with the
air conditioner.
Owner: Keep these
instructions for future
use.
instructions for future
use.
YOU WILL NEED:
• Universal power
connector kit.
• Phillips screwdriver.
11