York YCJF24 User Manual

ISO 9001

Certified Quality

Management System

LISTED

 

413437-YTG-C-0908

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

The 14.5 SEER Series condensing unit is the outdoor part of a
versatile system of air conditioning. It is designed to be custom-
matched with one of UPG’s complete line of evaporator sec-
tions, with each serving a specific function. Matching Air Han-
dlers are available for upflow, downflow, or horizontal
applications to provide a complete system. Electric Heaters are
available, if required. Add-on coils are available for use with
upflow, downflow, or horizontal furnaces and air handlers.

Single Phase Units:
5-year limited parts warranty.
10-year limited compressor warranty.

• QUALITY CONDENSER COILS - The coil is constructed of

aluminum microchannel tubing and enhanced aluminum fins
for increased efficiency and corrosion protection.

• PROTECTED COMPRESSOR - The compressor is inter-

nally protected against high pressure and temperature and
externally by a factory installed high pressure switch. This
protects the compressor if undesirable operating conditions
occur. A liquid line filter-drier further protects the compressor.

• DURABLE FINISH - The cabinet is made of pre-painted

steel. The pre-treated galvanized steel provides a better
paint to steel bond, which resists corrosion and rust creep.
Special primer formulas and matted-textured finish insure
less fading when exposed to sunlight.

• LOWER INSTALLED COST - Installation time and costs are

reduced by easy power and control wiring connections.
Available in sweat connect models only. The unit contains
enough refrigerant for matching indoor coils and 15 feet of
interconnecting piping. The small base dimension means
less space is required on the ground or roof.

• TOP DISCHARGE - The warm air from the top mounted fan

is blown up away from the structure and any landscaping.
This allows compact location on multi-unit applications.

• LOW OPERATING SOUND LEVEL - The upward air flow

carries the normal operating noise away from the living area.
The rigid top panel effectively isolates any motor sound. Iso-
lated compressor mounts minimize compressor operating
sounds. Additional sound attenuation is provided by a swept-
wing fan blade and compressor blanket. 

• LOW MAINTENANCE - Long life permanently lubricated

motor-bearings need no annual servicing.

• EASY SERVICE ACCESS - Fully exposed refrigerant con-

nections, and a single panel covering the electrical controls
make for easy servicing of the unit.

• SECURED SERVICE VALVES - Secured re-usable service

valves are provided on both the liquid and vapor sweat con-
nections for ease of evacuating and charging.

• U.L. and C.U.L. listed - approved for outdoor application.

• Agency Listed  - U.L. and C.U.L. listed - approved for out-

door application. The unit is certified in accordance with the
Unitary Small Equipment cerification program, which is
based on ARI Standard 210/240.