York MLCA-MLHA-07-24 User Manual

ENGLISH

OPTIMAL OPERATION

To achieve optimal performance, Please note the following:
• Adjust the air flow direction correctly so that it is not directed on people.
• Adjust the temperature to achieve the highest comfort level. Do not adjust the unit to excessive temperature levels.
• Close doors and windows on COOL or HEAT modes, or performance may be reduced.
• Use TIMER ON button on the remote controller to select a time you want to start your air conditioner.
• Do not put any object near air inlet or air outlet, as the efficiency of the air conditioner may be reduced and the air

conditioner may stop running.

• Clean the air filter periodically, otherwise cooling or heating performance may be reduced.
• Do not operate unit with horizontal louver in closed position.

PREPARATION BEFORE INSTALLATION

• Before doing any work, check the interior power supply cord and the main breaker capacity are sufficient and the

installation area is sufficient and complies with the requirements.

• Check that the power supply available agrees with name plate voltage.
• Electrical work, wiring and cables must be in compliance with national and local wiring codes and standard.
• Do not use the extension cables. In the case extended cables are needed, use the terminal block.

SELECTION OF THE LOCATION

• Select a place which provides the space around the units as shown in the diagram below.

INDOOR UNIT

OUTDOOR UNIT

• Do not install in a place that cannot bear the weight of the unit.

CAUTION

Models

12cm

70cm

12cm

15cm

Models

30cm

200cm

60cm

30cm

J199.pmd

31/03/2005, 9:53 PM