Emerson ACM1000M-XXX Installation Instruction
2
Before installing or servicing, always
shut off electricity. This will prevent any
electrical shocks.
shut off electricity. This will prevent any
electrical shocks.
INTRODUCTION
The Emerson Media Air Cleaner comes complete with a 4”
media furnace air fi lter. This fi lter must be changed every three
to six months to maintain effi ciency of the fi lter and furnace
system.
media furnace air fi lter. This fi lter must be changed every three
to six months to maintain effi ciency of the fi lter and furnace
system.
Please read instructions before installing and using the Air
Filter Compartment.
Filter Compartment.
The fi ber fi lter used in this cabinet for air cleaning
must be replaced every 90 to 180 days. Your heating
and cooling effi ciency will decrease due to insuffi cient
air fl ow when fi lter becomes dirty.
must be replaced every 90 to 180 days. Your heating
and cooling effi ciency will decrease due to insuffi cient
air fl ow when fi lter becomes dirty.
CAUTION
!
Do not attempt installation of this unit unless you
are familiar with the necessary tools, equipment, and
potential hazards.
are familiar with the necessary tools, equipment, and
potential hazards.
Installation should be performed only by a qualifi ed
service provider.
service provider.
Failure to do so could result in reduced performance
of the unit, serious personal injury or death.
of the unit, serious personal injury or death.
WARNING
!
GUARANTEE
Emerson will not assume any responsibility for component
failures due to incorrect installation procedures.
failures due to incorrect installation procedures.
RULES FOR SAFE INSTALLATION
AND OPERATION
1. Read the Owners Manual and the Rules for Safe Operation
carefully. Failure to follow these rules and instructions could
cause a malfunction of fi lter or unsatisfactory service.
cause a malfunction of fi lter or unsatisfactory service.
2. Follow a regular service and maintenance schedule for
effi cient operation.
Installation of this unit must comply with local electric
codes or other applicable codes.
codes or other applicable codes.
Review and understand local codes prior to
installation.
installation.
WARNING
!
WARNING
!
TABLE OF CONTENTS
Rules for Safe Installation and Operation ...................... 2
How the Air Filter Works ................................................ 3
Construction of the Air Filter Compartment ................... 3
Preinstallation ................................................................ 4
Installation ..................................................................... 6
Maintenance .................................................................. 6
DID YOU GET THE RIGHT SIZE
AIR FILTER COMPARTMENT
Model ACM1000M are designed for heating or cooling blowers
delivering 600 to 1200 cubic feet of air per minute (cfm.)
delivering 600 to 1200 cubic feet of air per minute (cfm.)
Model ACM1400M are designed for heating or cooling blowers
delivering 1000 to 1600 cfm.
delivering 1000 to 1600 cfm.
Model ACM1600M are designed for heating or cooling blowers
delivering 1200 to 1800 cfm.
delivering 1200 to 1800 cfm.
Model ACM2000M are designed for heating or cooling blowers
delivering 1600 to 2200 cfm.
delivering 1600 to 2200 cfm.
Before installing the fi lter, make sure you have selected
the proper size unit for your heating and cooling system
requirements. See specifi cations on page 4.
the proper size unit for your heating and cooling system
requirements. See specifi cations on page 4.
BASIC TOOLS REQUIRED
• Tin Snip
• Screwdriver
• Ruler or Tape Measure
• Drill
• Screwdriver
• Ruler or Tape Measure
• Drill