Manualsbrain.com
  1. Manuals
  2. Brands
  3. Enviro
  4. EF3
  5. User Manual

Enviro EF3 User Manual

Download
Page of 43
27
Installation
I
NSTALLATION
 
AND
 R
EMOVAL
 
OF
 T
HE
 S
URROUND
 P
ANELS
 - FPI 
AND
 BIH:
Magnetic Strips
Two (2) pieces make
up one (1) corner bracket
Corner Brackets
Figure 38: Assembling the Surround Panel, 
back view. 
Figure 36: Assembling Trim for Surround Panel. 
Figure 37: Panel placed on unit. 
1. Assemble the trim set using the corner hardware and screws supplied in the surround panel packaging. 
Install corner hardware into the side trim pieces, then push them into the top trim. Do not over-tighten 
the corners or the side trim cannot be removed during servicing. See Figure 36.
2. Using three (3) T-20 screws on each side attach the hinges on the side surround panels to the unit’s 
side panels (refer to Figure 37). 
3. Plug the wiring harness into the control panel (see Figure 34). 
4. Loosen the front hopper lid screws and center the top surround panel under the hopper lid, tighten 
screws. 
5. Insert each side panel anchor bolt through the top panel into the corresponding side panel holes and 
tighten using a 
7
/
16
” wench or socket (refer to Figure 38).
6. Place assembled trim over the surround assembly.